WLAN einrichten
Anleitung habe ich von hier : http://rasspberrypi.wordpress.com/2012/09/02/wifi-on-rasspberry-pi-with-asus-usb-n10/ kopiert.
Entered lsusb You should get following on one line.
Bus 001 Device 004: ID 0b05:1786 ASUSTek Computer, Inc. USB-N10 802.11n Network Adapter [Realtek RTL8188SU]
Entered lsmod You should get following on one line.
r8712u 180848 0
Now time to Edit the interfaces file. Traverse to the following path /etc/network and open “interfaces” file in an editor 5.1 Create a Backup of the interfaces file
sudo cp interface interfaces.backup ls -l
On ls- l you should see the interfaces.backup file will be created. Open in file in editor
sudo nano interfaces
Append the code to the interfaces file without the quotes for ssid and wpa-psk key
allow-hotplug wlan0 auto wlan0 iface wlan0 inet dhcp wpa-ssid "your network ssid" wpa-psk "network passwd"
Save it using Ctrl+X
weitere Feinheiten: http://www.datenreise.de/raspberry-pi-wlan-einrichten-edimax/
Sobald der Stick eingesteckt wurde, wird er von Raspbian auch schon erkannt. Dies kann einfach mit folgendem Befehl überprüft werden:
$ dmesg
Anschließend sehen wir in der Ausgabe, dass ein WLAN Adapter von Realtek erkannt wurde und der passende Treiber (rtl8192cu) geladen wurde:
Power Saving (“Schlafmodus”) abschalten
Bevor wir eine WLAN-Verbindung herstellen, sollte die Stromsparfunktion des Edimax-Treibers deaktiviert werden. Andernfalls wird eine Verbindung bei Inaktivität unterbrochen. Um dies zu verhindern, muss eine Konfigurationsdatei für den Treiber angelegt werden:
sudo nano /etc/modprobe.d/8192cu.conf
Diese Datei bekommt folgenden Inhalt: (ggfs anpassen)
options 8192cu rtw_power_mgnt=0 rtw_enusbss=0
SSID eingeben
Interfaces einrichten
sudo nano /etc/network/interfaces
# interfaces(5) file used by ifup(8) and ifdown(8) # Please note that this file is written to be used with dhcpcd # For static IP, consult /etc/dhcpcd.conf and 'man dhcpcd.conf' # Include files from /etc/network/interfaces.d: source-directory /etc/network/interfaces.d auto lo iface lo inet loopback iface eth0 inet manual allow-hotplug wlan0 iface wlan0 inet manual wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf allow-hotplug wlan1 iface wlan1 inet manual wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
wpa conf einrichten
sudo nano /etc/wpa_supplicant/wpa_supplicant.conf
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 country=DE network={ ssid="DIESSID" psk="MEINPASSWORT" key_mgmt=WPA-PSK }